Bedienungsanleitung ROWENTA CO 110

[. . . ] CO110 - CO116 - CO118 - CO120 Italiano Dansk BESCHREIBUNG A. Thermostatknopf (Position 1 bis 9 plus Position Frostfrei) D. Heizlüfter-Luftaustrittsgitter (Modell CO-170 CO-172) G. Thermostat dial (positions 1 to 9, plus frost-free position) D. [. . . ] G If you have to use an extension lead, it must not be longer than 25 m and the section of each conductor wire must not be less Ideal for long-term heating of rooms, this appliance has 4 than 1. 5 mm2. The power lead and extension lead must be comdifferent protective systems: pletely unwound. 1 heat insulating side panels, to reduce the risk of burns, G Never place the appliance beneath a electrical wall socket. 2 anti tip-over device, G Never use the appliance near inflammable objects, in a room 3 overheat safety device, containing explosive gases or while using glue and solvents. 4 dual electrical insulation (enabling it to operate with an G Never use it to reheat foodstuffs or other products. G Do not touch the hot air distribution outlet grill(s) immediately after turning off the appliance: you could suffer burns. However, this appliance is not designed for use in a bathroom or any other room in which it may be splashed with water. G Do not place it near another heat source (fireplace. . . ) G Do not use your appliance on a vibrating floor (washing machine or compressor nearby). G Avoid using your appliance in a Very important: dusty room. G NEVER ALLOW WATER TO ENTER THE APPLIANCE (e. g. Do not place the applianG Never insert objects into your ce under a washing line, do not use it near a washbasin, bathtub, shower or pool, nor in appliance. CO110 (2 control knobs) To turn it on, turn the control dial to the required setting: half power (750 W) full power (1500 W) To turn it off, turn the dial back to its initial position . CO120 (2 control knobs) To turn it on, turn the control dial to the required setting: half power (1000 W) full power (2000 W) To turn it off, turn the dial back to its initial position . 0 0 FAN MODELS The fan heater position provides faster and more uniform heat distribution. CO170 (single-power convector or fan heater) (2 control knobs) To turn it on, turn the control dial to the required setting: half power (2000 W) fan (2000 W) To turn it off, turn the dial back to its initial position . CO172 (dual-power convector or fan heater) (2 control knobs) To turn it on, turn the control dial to the required setting: half power convector (1000 W) half power convector (2000 W) fan (2000 W) To turn it off, turn the dial back to its initial position . 0 0 3 THERMOSTAT 4 FROST-FREE POSITION First turn the control dial to any position other than off (except model 6616). This position enables you to keep the temperature automatical(except model CO116). ly above 0°C in a normally insulated room, whose size corresTo increase the temperature, turn the thermostat dial to setting 9. ponds to To increase the temperature, turn the thermostat dial anti-clockwise (to setting 1) the power of your appliance. To reduce the temperature, To reduce the temperature, turn the thermostat dialreaches the chosen To do this: anti-clockThe appliance will stop automatically as soon as it temperature. It will restart, if necessary, wise (to setting 1) - set the thermostat dial to frost-free position . The appliance will stop automatically as soon as it reaches the - turn the control dial to (mod. CO118 / CO170) or half-power selected temperature. [. . . ] stop: . ENG 5 - MAINTENANCE I After turning the control dial to , or the thermostat dial to for model CO116, unplug the appliance and let it cool down completely. I Regularly dust the air inlet and outlet grills with a dry cloth or vacuum cleaner, without dismantling the appliance. I To remove stains, use a slightly dampened cloth. Important: Never let water enter the appliance. [. . . ]