Bedienungsanleitung TRENDNET TEW-436BRM QUICK INSTALLATION GUIDE

[. . . ] Anleitung zur Schnellinstallation TEW-436BRM 1. 01 Table of Contents Deutsch 1. Einrichtung der Verschlsselung 1 1 3 4 7 Troubleshooting Wireless Tips 8 10 Version 11. 02. 2009 1. Bevor Sie anfangen Packungsinhalt TEW-436BRM ? ?Mehrsprachige Installationsanleitung CD mit Bedienungsanleitung ? ? [. . . ] Contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the TEW436BRM is TRENDnet436. If you have enabled any encryption on the Wireless Modem, make sure to configure the wireless network adapter with the same encryption key. Take a pin or paperclip and press the reset button on the back of the Wireless Modem for 15 seconds. This will return all settings to factory default. The default user name and password is admin. If you still encounter problems or have any questions regarding the TEW-436BRM, please contact TRENDnet's Technical Support Department. 9 Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like "Smith Family Network". Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues. The preferred method of securing a wireless network is to choose a strong form of encryption with a strong and varied encryption key. Note: after setting up the SSID, encryption type and encryption key/passphrase, please make a note of them for future reference. You will need this information to connect your wireless computers to the wireless router/access point. Change the channel Most wireless access points and routers are defaulted to channel 6. If you have a site survey tool that will display the channels you can plan your channel selection around neighboring access points to minimize interference from them. If your site survey tool does not display the channel try using channels 1 or 11. Change the channel bandwidth If you are using an 802. 11n router or access point you can also make the following changes. Change the channel bandwidth to 20/40MHz. This will provide the highest possible performance using an 802. 11n device. Also, if using 802. 11n you should be securing the network with WPA2 security. Note: Due to Wi-Fi certification considerations if you choose WEP, WPA or WPA2-TKIP encryption this device may operate in legacy wireless mode (802. 11b/g). [. . . ] 20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511 GPL/LGPL TRENDnet , . GNU General Public License ("GPL") GNU Lesser General Public License ("LGPL"). (http://www. gnu. org/licenses/gpl. txt) (http://www. gnu. org/licenses/lgpl. txt) . [. . . ]