Bedienungsanleitung AEG-ELECTROLUX EWS11254EDU

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. electrolux. com Register your product for better service: www. electrolux. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. electrolux. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. [. . . ] To deactivate/activate the acoustic sigand at the same time nals, press for 6 seconds. If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. 7. 10 Acoustic signals The acoustic signals operate when: 8. BEFORE FIRST USE 1. 2. Put 2 litre of water in the detergent compartment for washing phase. Put a small quantity of detergent in the compartment for washing phase. 3. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. 9. • Connect the mains plug to the mains socket. 9. 1 Loading the laundry 1. Put the laundry in the drum, one item at a time. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. ENGLISH 13 9. 2 Using detergent and additives 2 1 • Measure out the detergent and the fabric conditioner. The programme continues. 9. 7 Cancelling a programme 1. 2. Press the button for some seconds to cancel the programme and to deactivate the appliance. Press the same button again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. ENGLISH 15 9. 8 Opening the door While a programme or the delay start operates, the appliance door is locked and the display shows the indicator . If the temperature and level of the water in the drum are too high, you cannot open the door. Open the appliance door when the delay start operates: 1. 4. The washing programme is completed, but there is water in the drum: – The drum turns regularly to prevent the creases in the laundry. – You must drain the water to open the door. To drain the water: If necessary, decrease the spin speed. The appliance drains the water and spins. When the programme is completed and the door lock indicator goes off, you can open the door. 1. [. . . ] This problem may be caused by balance problems. Make sure that the couplings of the water hoses are tight and there is not water leakages. Make sure that the drain hose have no damages. Make sure you use the correct detergent and the correct quantity of it. [. . . ]